My Web Site Page 161 Ovations 03

Ovations

Sitemaps

Sulphide of iron formed during an assay will remain diffused through the slag, instead of fusing into a button of regulus, if the slag contain sulphide of sodium. The same is true of other sulphides if not present in too great a quantity, and if the temperature is not too high. _Speises_ are compounds of a metal or metals with arsenic. They are chiefly of interest in the metallurgy of nickel, cobalt, and tin. They are formed by heating the metal or ore in covered crucibles with arsenic and, if necessary, a reducing agent. The product is fused with more arsenic under a slag, consisting mainly of borax. They are very fusible, brittle compounds. On exposure to the air at a red heat the arsenic and the metal simultaneously oxidize. When iron, cobalt, nickel, and copper are present in the same speise, they are eliminated in the order mentioned. _Slags_ from which metals are to be separated should not be too acid; at least, in those cases in which the metal is to be reduced from a compound, as well as separated from earthy impurities. Where the object is simply to get a button of metal from a substance in which it is already in the metallic state, but mixed with dross (made up of metallic oxides, such as those of zinc or iron), from which it is desired to separate it, an acid flux like borax is best; or, if the metal is easily fusible, and there would be danger of loss of metal by oxidation or volatilising, it may be melted under a layer of resin or fat. Common salt is sometimes used with a similar object, and is often useful. Under certain conditions, however, it has a tendency to cause the formation of volatile chlorides with a consequent loss of metal.

The drums are of three sheets, of such thickness as to give the required factor of safety under the maximum pressure for which the boiler is constructed. The circular seams are ordinarily single lap riveted though these may be double lap riveted to meet certain requirements of pressure or of specifications. The longitudinal seams are properly proportioned butt and strap or lap riveted joints dependent upon the pressure for which the boilers are built. Where butt strap joints are used the straps are bent to the proper radius in an hydraulic press. The courses are built independently to template and are assembled by an hydraulic forcing press. All riveted holes are punched one-quarter inch smaller than the size of rivets as driven and are reamed to full size after the plates are assembled. All rivets are driven by hydraulic pressure and held until black.

The Whooping Crane is much larger than the common crane, which it otherwise much resembles except in color; its plumage, in its adult state, is pure white, the tips of the wings black. He spends the winter in the southern parts of North America, and in summer migrates far northwards. The crane feeds on roots, seeds, etc., as well as on reptiles, worms, insects, and on some of the smaller quadrupeds. They journey in flocks from fifty to a hundred, and rise to an immense height in the air, uttering their loud harsh cries, and occasionally alighting to seek food in fields or marshes; and when they descend on a field they do sad havoc to the crops, several doing sentinel duty while the majority are feeding. In general it is a very peaceful bird, both in its own society and those of the forest.

This page is Copyright © Cake Placebo. All Rights Reserved. My Web Site Page 161 is a production of Cake Placebo and may not be reproduced electronically or graphically for commercial uses. Personal reproductions and browser or search engine caching are acceptable.

Ovations provided by My Web Site Page 161 are included only for information. The entertainment value of My Web Site Page 161's ovations may vary on the basis of your personal needs. Cake Placebo and My Web Site Page 161 take no responsibility for the content provided by other Web sites. Links are provided "as is" without liability or warranty.